elite cr-33 miniature dc-22ghz spdt switch failsafe the cr-33 switch is a broadband, sp dt, elect romechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outpu ts. the cr-33 series has a higher operting frequency and temperature range than the commercial ccr-33 se- ries. the chara cterist ic impedance is 50 ohms. the switc hes are small with connector spac- ing compatible with sma connectors. the cr-33 series switch is offered with either a failsafe or latching actuator. this design is compatible with the two most common mounting hole patt erns. the cr-33 series switc h is interchange- able with a variety of switches. 3000 800 400 200 80 40 10 )sttaw( wc rewop 0.1 1.0 4.0 10 18 22 frequency ghz standard sma connectors specifications rf contacts: b reak bef ore ma ke actuator v olt ag e (v dc) 20 o c 12 15 28 curren t (ma) 200 16 0 90 switching time: 20 msec max c onnectors: sma (f) weight: 1.65 oz. max t emperature range: -55 o c to +85 o c (operating) shock: mil-std-202 method 213, condition d (500g non operating) vibration: mil-std-202 method 214, condition d (10g rms non operating) humidity: mois ture seal a vailable typical contact life: 5 m illion cycles rf pow er handling specifications dc-6 gh z 6- 12 ghz 12- 18 ghz 18- 22 ghz vswr (max) 1.25:1 1.40:1 1.50:1 1.60:1 ins ert ion loss (min ) 0. 20 db 0. 40 db 0. 50 db 0. 60 db i sola tion (max) 70 .0 db 60 .0 db 60 .0 db 50 .0 db ty pica l perfo rma nce 15 25 ssol nruter 0.01 22.0 frequency ghz 0.01 22.0 frequency ghz 0.0 0.4 bd li bd noitalosi 90 80 70 60 t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2007 insertion loss repeatability (1 million cycles): dc to 6 ghz: 0.05 db dc to 20 ghz: 0.1 db
analog ttl indicat ors ser ies connectors actuator v olt age part numbering system for cr-33 (failsafe) cr-33 s 1 o - n opt ions act uat or t ype connector s: sma female actuator voltage 1: 28vdc failsafe 2: 15vdc failsafe 3: 12vdc failsafe actuator t ype o: no indicator contacts c: indicator contacts opt ions t: ttl drivers wi th diodes n: narrow body r: positive + common optional narrow width body standard width body for other options cont act factory elite cr-33 miniature dc-22ghz spdt switch failsafe h = 1.30 max. std model h = 1.80 max. ttl model h = 1.30 max. std model h = 1.80 max. ttl model t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2007
|